Sanyo CO2 Incubator MCO-19AIC (UV) Cell Culture Incubator - See Description

Sanyo CO2 Incubator MCO-19AIC (UV) Cell Culture Incubator. Unit is used with some scuffs, scratches, and general wear from use (see pictures, comes as shown). Unit powers on and heats to set Temp, takes some time for it to get there. RH pan is missing.  CO2 option not tested. Oven seems to work however RH Pan gives a water level alarm fault.  In researching an online manual it state t his lamp flashes when the water in the humidifying pan is less than approximately 1 liter.  Unit was tested with a pan of water but it did not sense there was water. Info on Incubator: Sanyo CO2 Incubator Model: MCO-19AIC (UV) Interior Volume: 170 L Rated Voltage: AC110-120 V Rated Frequency: 60 Hz Amperage: MAX. 2.8 A Power Consumption: MAX. 350 W NET WEIGHT: 93 kg Serial: 11030171 Manufacturer's Description: The Sanyo MCO-19AIC(UV) CO2 Incubator is a cell culture incubator with a 6.0 cubic foot chamber (170L). It has advanced humidity and temperature control technology, and three sources of heat. The incubator has a temperature range of ambient +5°C to 50°C, and a UV sterilization. It also has a CO2 level of 0% to 20%. ALL QUESTIONS AND OFFERS WELCOME