Nidec Servo KH42KM2-911 2-Phase Hybrid Double Shaft Stepping Motor
$94.95
Description
Nidec Servo KH42KM2-911 2-Phase Hybrid Double Shaft Stepping Motor. Unit was pulled from a decommissioned system in working order.
Info on Stepper:
Servo Nidec
3315 | KH42KM2-911
Manufacturer's Description:
DRIVE METHOD: UNI-POLAR
NUMBER OF PHASES: 2
STEP ANGLE | deg./step: 1.8
VOLTAGE | V: 3.72
CURRENT | A/PHASE: 1.2
WINDING RESISTANCE | Ω/PHASE: 3.1
INDUCTANCE | mH/PHASE: 3.1
HOLDING TORQUE | mNã»m: 340 |ozã»in: 48
DETENT TORQUE | mNã»m: 19.6 | ozã»in: 2.8
ROTOR INERTIA | gã»cm2: 85 | ozã»in2: 0.46
WEIGHTS | g: 360 | lb: 0.79
INSULATION RESISTANCE: 500VDC, 100MΩmin.
DIELECTRIC STRENGTH: 500VAC, 50HZ, 1min.
OPERATING TEMP. RANGE | â: 0 to 50
ALLOWABLE TEMP. RISE | K: 70
ALL QUESTIONS AND OFFERS WELCOME
Specifications
| Manufacturer | Nidec Servo |
| Model | KH42KM2-911 |
| Condition | Used |
| Full Step Angle | 1.8° (200 Steps) |
| Current Type | DC |
| Shaft Type | Solid Shaft |
| Nominal Rated Input Voltage | 3.72 |
| Shaft Diameter | 1/4 in |
| Wiring Configuration | 6-Wire Bipolar, 6-Wire unipolar |
| Holding Torque | 340 mN・m |
| Custom label (SKU) | ?ICM466 |