Hettich 2350-01 MIKRO 220 Robotic Automated Benchtop Centrifuge W/ Rotor

Hettich 2350-01 MIKRO 220 Robotic Automated Benchtop Centrifuge with SK 14.18-01 rotor and SK 14.18-02 buckets. Centrifuge is used. See pictures, comes as shown. Removed from a decommissioned Selux Phenotyping System. Centrifuge is tested and working.

We do not have a key for this system. Had to pick the lock to change between control settings. Lock functions below:

• "0": This is the standard operating mode where users can run existing programs. Depending on the specific configuration, manual changes to parameters may be restricted. Controlling the centrifuge via the interface is not possible
• "TEACH": This mode is specifically for robotic integration. It allows the operator or service engineer to "teach" the robot the exact coordinates for the rotor positions. In this mode, you can manually rotate the rotor to specific stop positions and save them so the robotic arm can accurately load and unload samples. Allows for opening and closing of robotic door.
• "LOCK 2": This is a higher-level security setting. It typically locks all program parameters, preventing any unauthorized users from modifying saved centrifugation programs (speed, time, temperature). Only users with the key can switch out of this mode to edit settings. The centrifuge can be controlled via the interface

Your are also able to enter the setup menu by powering off the system. Then while holding the "Start" and "Stop/Open" simultaneously, power the system on and wait 5-10 seconds. This should bring you to the setup screen.

Info on centrifuge:

• Hettich
• REF: 2350-01
• MIKRO 220 Robotic
• SN: 0000144 REV: 01 | EQ: 10496261
• 2023-09-04
• 480 VA
• E kin: 8300 Nm
• MAX RPM: 13000/min
• MAX Density: 1.2 kg/dm^3
• 110-127V~ 50/60HZ

Info on Rotor:

• Hettich
• SK 14.18-01
• 5000RPM
• 6x17g

Info on Buckets:

• Hettich
• SK 14.18-02

ALL QUESTIONS AND OFFERS WELCOME

Buy with confidence, we have a 100% satisfaction guarantee.

cyberjoes

220 2nd St NW

Fayette, AL 35555